19
English
03
Basic Featur
es
■
Auto Motion Plus (Off / Clear / Standard / Smooth /
Custom / Demo)
: Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
✎
The info screen on your TV displays the resolution
and frequency of the incoming video signal (60
Hz). This displayed frequency is not what the TV is
displaying by using the Auto Motion Plus function.
✎
If noise occurs on the screen, please set the
Auto Motion Plus
to
Off
. If
Auto Motion Plus
is
Custom
, you can set up the
Blur Reduction,
Judder Reduction
or
Reset
manually.
✎
If
Auto Motion Plus
is
Demo
, you can compare
the difference between on and off modes.
Blur Reduction
: Adjusts the blur reduction level from
video sources.
Judder Reduction
: Adjusts the judder reduction level
from video sources when playing films.
Reset
: Reset the custom settings.
■
Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off)
: Set the time the screen remains idle
with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on
the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
¦
Setting up the TV with your PC
Set the input source to PC.
O
MENU
m
→
Picture
→
ENTER
E
Auto Adjustment
t
Adjust frequency values/positions and fine tune the settings
automatically.
✎
Not available when connecting with an HDMI/DVI cable.
Screen
■
Coarse / Fine
: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (
Coarse
) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
■
Position
: Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the
▲
or
▼
button to adjust
the Vertical-Position. Press the
◄
or
►
button to adjust
the Horizontal-Position.
■
Image Reset
: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1.
Click on “Control Panel” on the Windows start menu.
2.
Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3.
Click on “Display” and a display dialog box will appear.
4.
Navigate to the “Settings” tab on the display dialog-box.
y
The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
y
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz’.
Otherwise, just click “OK” and exit the dialog box.
Sound Menu
¦
Changing the Preset Sound Mode
O
MENU
m
→
Sound
→
SRS TheaterSound
→
ENTER
E
SRS TheaterSound
t
■
Standard
: Selects the normal sound mode.
■
Music
: Emphasizes music over voices.
■
Movie
: Provides the best sound for movies.
■
Clear Voice
: Emphasizes voices over other sounds.
■
Amplify
: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
¦
Adjusting sound settings
O
MENU
m
→
Sound
→
Equalizer
→
ENTER
E
Equalizer
Adjusts the sound mode (standard sound mode only).
■
Balance L/R
: Adjusts the balance between the right and
left speaker.
■
100Hz / 300Hz / 1kHz / 3kHz / 10kHz
(Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■
Reset
: Resets the equalizer to its default settings.
[LC650_USA]BN68-02541A-03Eng.indb 19
2010-06-25 오후 5:01:20
