English -
Setting up the TV with your PC
Preset: Press the
SOURCE
button to select PC mode.
Auto Adjustment
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC
video signal. The values of fine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
Press the
TOOLS
button to display “
Tools
” menu. You can also set the Auto
Adjustment by selecting “
Tools
→ Auto Adjustment”.
Screen
Coarse / Fine: The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been
reduced, readjust the picture so that it is aligned on the center of screen.
PC Position: Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the
Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset:
You can replace all image settings with the factory default values.
N
❑
N
T
❑
Sound Control
Changing the Sound Standard
Mode → Standard / Music / Movie / Speech / Custom
You can select the type of special sound effect to be used when watching a
given broadcast.
Press the
TOOLS
button to display “
Tools
” menu. You can also configure
the sound mode by selecting “
Tools
→
Sound Mode
”.
Equalizer
The sound settings can be adjusted to suit your personal preferences.
Mode
: You can select a sound mode to suit your personal preferences.
Balance
: Controls the balance between the right and left speakers.
100Hz / 300Hz / 1kHz / 2kHz / 3kHz / 10kHz (Bandwidth Adjustment): To
adjust the level of different bandwidth frequencies
Reset
: Resets the equalizer settings to the default values.
SRS TruSurround XT → Off / On
TruSurround XT is a patented SRS technology that solves the problem of
playing 5.1 multichannel content over two speakers. TruSurround delivers
a compelling, virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
Press the
TOOLS
button to display “
Tools
” menu. You can also set the SRS TruSurround XT by selecting “
Tools
→
SRS
TS XT
”.
TruSurround XT
, SRS and
Symbol are trademarks of SRS Labs, Inc.
TruSurround XT
technology is incorporated under license from SRS Labs, Inc.
❑
T
❑
❑
T
Brightness
: 45
Sharpness
: 50
Auto Adjustment
►
Screen
Detailed Settings
Picture Options
Picture Reset
Picture
Mode
: Custom
Equalizer
SRS TruSurround XT
: Off
►
Audio Language
: ----
Audio Format
: ----
Audio Description
Auto Volume
: Off
Select Speaker
: TV Speaker
Sound Select
: Main
Sound Reset
Sound
Select Speaker
: TV Speaker
Sound Select
: Main
Sound Reset
►
Sound
BN68-01700A-ENG.indb 18
2008-07-31 �� 6:26:34
