Samsung BN68-01699A-00 страница 9 Скачать руководство пользователя

Страница: 9 / 44

english -

Lift the cover at the back of the remote control upward as shown in the

figure.

Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

diagram inside the compartment.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t

be using the remote control for a long time.

➣

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

➣

Installing batteries in the remote Control

Switching on and off

the mains lead is attached to the rear of your set.
1.

Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

Press the button on your set.

You also can press the

PoWer

button or the

button on the remote control to turn the TV

on.

The channel that you were watching last is reselected automatically

Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on your set.

When you switch the set on for the very first time, you will be asked to choose language in which the

menus are to be displayed.

To switch your set off, press the

PoWer

button again.

➣

Your set can be placed in standby mode in order to reduce the power consumption. the standby

mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.

Press the

PoWer

button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

To switch your set back on, simply press the

PoWer

, numeric buttons

(0~9)

button or

channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday,

for example).

It is best to unplug the set from the mains and aerial.

➣

Placing Your television in Standby mode

BN68-01699A-00Eng-0603.indd 7

2008-06-03 �� 5:14:35

Содержание BN68-01699A-00













































Результаты поиска

Содержание BN68-01699A-00

Отзывы:

Похожие инструкции для BN68-01699A-00

Бренды по названию

Популярные бренды

Samsung BN68-01699A-00, Руководство пользователя

Результаты поиска

Содержание BN68-01699A-00

Отзывы:

Похожие инструкции для BN68-01699A-00

Бренды по названию

Популярные бренды