Samsung BN68-01171B-03, Инструкция пользователя

Страница: 50 / 65

English - 50
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1 Press the button.
Press the ▲ or ▼ button to select Receiver , then press the
ENTER/OK button.
2 Press the ◄ or ► button to select to On , then press the
ENTER/OK button.
Now you can listen to sound through the receiver.
3 Press the EXIT button to exit.
➢
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
➢
If the receiver is exclusively for a home theater only (supporting
audio only), it may not appear in the device list.
➢
Only when you have connected the optical jack of the TV and
the receiver properly, does Receiver work.
➢
In case of a content with copyright problem, listening through the receiver may not properly operate.
➢
When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom Solution
does not work.
■ Check if the device is an device. The system
supports devices only.
■ Connect only one receiver.
■ Check if the device power cord is properly connected.
■ Check the device’s Video/Audio/HDMI cable connections.
■ Check whether (HDMI-CEC) is set to On in the
setup menu.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is exclusive remote control.
■ doesn’t work at a certain condition. (Searching channels)
■ When connecting or removing the HDMI cable, please make sure
to search devices again or restart your TV.
■ Check if the Function of device is set on.
I want to start . ■ Check if the device is properly connected to the TV and
check if the (HDMI-CEC) is set to On in the Setup
menu.
■ Press the TV button on the TV remote control to switch to TV. Then
press the button to show the menu and select a
menu you want.
I want to exit . ■ Select View TV in menu.
■ Press the SOURCE button on the TV remote control and select a
device other than devices.
■ Press any of CH , CH LIST , and PRE-CH to change to the
TV mode. (Note that the channel button operates only when a
tuner-embedded device is not connected.)
The Connecting to
device… message appears
on the screen.
■ You cannot use the remote control when you are configuring
or switching to a view mode.
■ Use the remote control when the setting or switching to
view mode is complete.
The device does not
play.
You cannot use the play function when Plug & Play is in progress.
The connected device is not
displayed.
■ Check whether or not the device supports functions.
■ Check whether or not the HDMI cable is properly connected.
■ Check whether (HDMI-CEC) is set to On in the
setup menu.
■ Search devices again.
■ You can connect an device using the HDMI cable only.
Some HDMI cables may not support functions.
The TV program cannot be
recorded.
Check whether the antenna jack on the recording device is properly
connected.
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
Enter
Move
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver :On 
Setup

TV P 1
Exit
BN68-01171A-03Eng_0319.indd 50 2007-03-19 ｿﾀﾈﾄ 3:40:41