Call Functions
24
Selecting Functions and Options
Putting a Call on Hold
You can place the current call on hold whenever you want. If your netowrk supports
this service, you can also make another call while a call is in progress.
To place a call on hold:
1.
Press the
Options
soft key, highlight the
Hold
option, then press the
Select
soft key or the
key.
2.
Press the
Resume
soft key to reactivate the call.
To make a new call while a call is in progress:
1.
Enter the new phone number that you wish to dial or look it up in the
Contact list.
2.
Press the
key to dial the second call.
The first call is then automatically put on hold.
- Or -
1.
Press the
Options
soft key, select
Hold
, and press the
key. This
places the currently active call on hold and allows to make a new call.
2.
Make the second call in the normal way.
When there is an active call and a call on hold, you may switch between the two
calls by placing the current held call to active and then placing the other call on hold.
To switch between the two calls:
1.
Press the
Options
soft key, select
Swap
, and press the
key. The
current active call is placed on hold and the call on hold is then reactivated
so that you can continue conversing with that person.
2.
Press the
key when you are finished or want to end the call.
Using the Speakerphone
While on a call, you can use your Speakerphone by following these steps:
1.
Press the
Spkr on
soft key.
2.
To turn the Speakerphone off, press the
Spkr off
soft key.
Important!:
For safety information related to speakerphone use, see
"Responsible Listening"
on page 141.
