The problem
Try this!
The message "Connecting to
device..." or
"Disconnecting from
device" appears on the screen.
You cannot use the remote control when the TV is configuring or switching
to the TV viewing screen.
Use the remote control after the TV has completed the configuration or has
switched to the TV viewing screen.
The device won't play.
You cannot use the play function when
Reset
is in progress.
The connected device is not
displayed.
Check whether the device supports .
devices must be connected to the TV using an HDMI cable. Make sure the
device is connected to your TV with an HDMI cable. Some HDMI cables may not
support .
Check whether the HDMI cable is properly connected.
Go to
(HDMI-CEC)
and see if
(HDMI-CEC)
has been set to
On
.
•
Settings
General
External Device Manager
(HDMI-CEC)
Scan for devices again.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
- 114 -
