SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
7-5
This Document can not be used without Samsung's authorization
5
8
7
1) Assemble KEY PAD to KEY BRACKET.
[Figure 1 ]
2) Firstly,Insert MIC into the MIC rib of FRONT.
[Figure 2 ]
※
caution
1) Be careful not to make a mistake.
1) Insert the MIC of KEY PBA into the hole of
KEY BRACKET.[Figure 1]
2) Insert KEY CONNECTOR into KEY BRACKET
hole.[Figure 2]
※
caution
1) Mind the order of assembly.
1) Attach the DOME SHEET following the
wall.[Figure 1]
2) Attach electric conduction tape(1EA) on rear side
of BRACKET. [Figure 2]
※
caution
1) Be careful of the position electric conduction
tape.
6
< Figure 2 >
< Figure 1 >
< Figure 1 >
< Figure 2 >
Guide RIB
Torch Light
Encloser 2PIN
CONNECTOR
MIC
KEY CONNECTOR
< Figure 1 >
< Figure 2 >
< Figure 1 >
< Figure 2 >
FRONT
MIC
KEY PAD
ASSY
Dome Sheet
Electric conduction tape
KEY PAD
1) Attach Torch Light which is removed a cover
of adhesive tape on encloser.[Figure 1]
2) Insert 2PIN Connector of Encloser into
connector.[Figure 2]
※
caution
1) GUIDE RIB 2POINT
에 맞춰서 안착한다
.
2) Be careful of the polarity of 2PIN CONNCETOR.