SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
7-3
This Document can not be used without Samsung's authorization
9
11
10
1) Detach MEGA CAMERA and MOTOR by using
disassemble hole.[Figure 1]
2) At first, seperate LCD FPCB CONNECTOR from
PBA, then detaching LCD form PBA.[Figure 2]
※
caution
1) Be careful not to make a damage of MEGA
CAMERA, FPCB of MOROT and wire.
2) Be careful,LCD FPCB, LCD module, PBA.
1)When you remove Shield Can, using tweezers.
[Figure 1]
※
caution
1) Be careful,near chips, shield cans and PBA.
1) After melting sodering, remove intenna from
PBA
※
caution
1) there are not screws on the PBA. Don't
assemble screws
< Figure 1 >
< Figure 2 >
MEGA CAMERA
LCD F-PCB CONNECTOR
MOTOR
< Figure 1 >
Shield Can
< Figure 1 >
The part of Intenna
Soldering.