22
English
Cl
eaning a
nd Maint
ena
nc
e
Cleaning and Maintenance
STEP 3
Cleaning and drying the front mesh
• Use water or a soft cloth to remove dust and other foreign
material on the front panel.
• If you cleaned the front mesh with water, dry it thoroughly
before attaching it to the product.
CAUTION
• The frame incorporates the display PBA.
Ensure that the frame does not come in contact with
water. Contact with water causes device failure.
STEP 4
Attaching the front mesh
•
Attach the front mesh to the front panel as follows:
– Insert the tabs on the front mesh into the slots (
①
)
at the bottom of the panel, and then push the areas
numbered
②
at the top of the mesh.
STEP 5
Attaching the front panel
• Attach the clip wire (
①
) to the front of the main unit.
• Insert the tabs on the panel into the slots (
②
) at
the bottom of the main unit, and then press the top
Centre of the panel to fasten it.
Front mesh
PULL
PULL
2
1
2
1
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 22
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 22
2021-09-03 오후 2:08:40
2021-09-03 오후 2:08:40
