27
English
Appendix
Display
The PM10, PM2.5, PM1.0 concentration values are
the same continuously.
• When the air is clean, you may not see a difference between the PM10,
PM2.5 and PM1.0 levels. To check if the sensor is functioning, test it by
tearing paper by the sensor and/or rub them to create some dust. This
will cause the PM levels to change if the sensor is working properly.
The filter replacement indicator is always turned on.
• After replacing the filters, press and hold the [
] button for
3 seconds or more to reset the filter replacement reminder.
Strange indications appear on the display.
• Contact your local Samsung Service Centre if your air purifier
displays
,
,
or