Samsung AVMDH, Руководство пользователя

Страница: 14 / 16

E-
14
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem Explanation/Solution
The air conditioner does not
operate at all.

Check if power is on and operate the air conditioner again.

Check if the circuit breaker is switched off.

Check if Off Timer is set.
The temperature is not adjusted.

Check if you selected the FAN mode.
The cool(warm) air does not come
out from the air conditioner.

Check if set temperature higher(lower) than current temperature.
 Check if you selected the Fan mode. Select the COOL, HEAT, AUTO or
DRY mode.

Check if the air filter is blocked by dirt. Clean the air filter regularly.

Check if the there is cover on the outdoor unit or any obstacle.
Remove the cover or obstacle.
 Check if you installed the air conditioner under direct sunlight.

The window or door may be opened.

Check if you turn on the air conditioner just now.
It takes about 3 minutes to cool or heat the room.

Check if the refrigerant pipe is too long.
The fan speed is not adjusted.

In AUTO or DRY mode, the fan speed is selected automatically.
The remote controller does
not operate.

Check if the battery is discharged. Replace the battery.

Check if the remote controller sensor is blocked.

Check if the air conditioner is placed near strong light.
The wired remote controller
does not operate.

Check if is displayed on the wired remote controller.
Turn off the air conditioner and switch off the circuit breaker.
Contact the service center.
The Timer is not set.

Check if you pressed the button after selecting time.
The air conditioner does not turn on
or off with the wired remote controller.

Check if you set the wired remote controller for group control.
Odor is permeated in the
room during operation.

Check if you use the air conditioner in smoky area or there is a smell.
Ventilate the room or select the FAN mode for 1~2 hours.
The indoor unit indicator
flashes.

Press the button to turn on the air conditioner again.
Switch the circuit breaker off and switch on it again.
Strange sound is heard from
the air conditioner.

The sound is heard when the refrigerant gas flow is changed depending
on the use of the air conditioner.

When you press the button, noise may be heard from the drain
pump inside of the air conditioner.

When you press the button, noise may be heard that the
air conditioner sense the airflow blade.
Water drops from the outdoor
unit connection part.

Water may form due to the difference of the temperature.
AVXDD_E_05587A-2.indd 14 2006-09-18 ｿﾀﾈﾄ 1:19:54