18
PROCEDURE OF INSTALLATION
1
2
3
4
1
2
GAS
CAUTIONS WHEN INSTALLING
REPLACING METHOD OF INDOOR LIGHT
Do not put the inflammables into
the unit.
• Flammable sprays may cause fire.
• Plugging-out is dangerous while leaking gas.
• Poor circulation of air may affect cooling function
because heat does not escape.
• Do not put things on the top
of the refrigerator because
they are liable for dropping
down.
Do not store goods on the top or
rear.
Indoor light of freezing room.
• insert driver into the rear groove of
light cover, and pull it forward,
Avoid heat sources or moisture.
• Rusting or decolorating may
happen.
Install the unit in the place where
surrounding temperature is low.
• Cooling efficiency gets better.
• The unit should be away from the
direct sunray.
Indoor light of refrigerating room.
• Remove the shelf of special room.
• Pluck out the power cord, first.
then remove it downward.
After replacing the light, insert the front part first,
and then the rear part by fixing the groove.
Press the top of the light cover with driver, and
pull it forward lowering a little, then replace the
indoor light after removing the cover.
CAUTION
SR-V52/57 (ENG) 11/15/59 4:29 PM Page 19
Содержание ASR-519
Страница 24: ...ELECTRONICS ...