List of compatible devices:
For iOS devices:
The operating system must be iOS 8 or more, such as iPhone
4S, iPhone 5/5C/5S, iPhone 6/6 Plus and so on.
For Android devices:
The operating system must be 4.3 or more.
CAUTION
1.
2.
Interference may occur in the vicinity of equipment marked with the following
symbol . And EI-B5000 may interfering vicinity electrical equipment.
Sensitive people, including pregnant women pre-eclamptic and those who
implanted medical electronic instruments, should avoid using the unit
whenever possible.
Keep the monitor at least 20 centimeters away from the human body
(especially the head) when the data transmission is proceeding
after
measurement.
To enable the data transmission function, this product should be paired to
Bluetooth end at 2.4 GHz.
How to mitigate possible interference?
The range between the device and BT end should be reasonably close, from
1 meter to 10 meters. Please ensure no obstacles between the device and
BT end so as to obtain quality connection and to lower the RF output range.
To avoid interference, other electronic devices (particularly those with
wireless transmission / Transmitter) should be kept at least 1
meter away
from the monitor.
RF Frequency Range
: 2402MHz to 2480MHz
Output Power Range
: ≤ 0 dBm
Supply Voltage
: 4.0-7.2V
Transmitting Distance
: 10 meters
Settinging the User
1
.
When the monitor is off, press the “ START/STOP ” button to turn on the
monitor, and it will show the current user. Long press the “START/STOP”
button agin to switch the user. There are 3 user intotal and guest mode.
(User mode store 60 grops message, guest mode doesn’t store message.
START/STOP BUTTON
SYS
DIA
HR
SYS
DIA
HR
SYS
DIA
HR
SYS
DIA
HR
MEASUREMENT
11
10
BEFORE YOU START
11
Tie the Cuff
1.
2.
3.
4.
5.
Remove all accessories (watch, bracelet,etc) from your arm. If
your physician has
diagnosed you with poor circulation in your arm, use the other one.
Roll or push up your sleeve to expose the skin.
Apply the cuff to your arm with your palm facing up.
Position the edge of the cuff about 2cm~3cm from elbow.
Fasten the cuff around your arm, leaving no extra room between the cuff and your
skin. If the cuff is too loose, the measurement will not be accurate.
Sit comfortably with your tested arm resting on a flat surface. Place your elbow on a
table so that the cuff is at the same level as your heart. Turn your palm upwards.
Sit upright in a chair, and take 5-6 deep breaths.
Rest for 5 minutes before first measurement.
Wait at least 3 minutes between measurements. This allows your blood circulation to
recover.
6.
7.
Helpful tips for Patients, especially for Patients with Hypertension:
