43
ENGLISH
Sub PCB installation(optional)
(Wried remote controller, central remote controller etc.)
1. Turn the power off and take off the front panel of the indoor unit.
2. Take off the Cover PCB.
3. Attach the Sub PCB to the right side of the Panel frame.
4. Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.
5. Connect the wire(remote controller, central remote controller etc) to the Sub
PCB.
6. Reassemble the Cover PCB and the front panel.
• The Sub PCB is attached to be controlled by the wired remote controller and central controller.
Only for multi system
Sub PCB
Cover
PCB
AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 43
2011-3-19 15:46:12
