ENGLISH
39
Final Check and Trial Operation
To complete the installation, perform the following checks and tests to
ensure that the air conditioner operates correctly.
Check the followings:
t4USFOHUIPGUIFJOTUBMMBUJPOTJUF
t5JHIUOFTTPGQJQFDPOOFDUJPOUPEFUFDUHBTMFBL
t&MFDUSJDXJSJOHDPOOFDUJPO
t)FBUSFTJTUBOUJOTVMBUJPOPGUIFQJQF
t%SBJOBHF
t(SPVOEJOHDPOEVDUPSDPOOFDUJPO
t$PSSFDUPQFSBUJPO GPMMPXUIFTUFQTCFMPX
1. Press the
Power
button and check the following:
X
The indicator on the indoor unit lights up.
X
The airflow blade opens and the fan gears up for operation.
1. Turn on the air conditioner and select Cool mode to run the compressor for 3 minutes.
2 . Release the valve caps on High and Low pressure side.
3 . Use L wrench to close the valve on the high pressure side.
4 . Approximately 2 minutes after, close the valve on the low pressure side.
5 . Stop operation of the air conditioner.
6 . Disconnect the pipes.
3. Press the
Air swing
button and check the following:
X
The airflow blades work properly.
4. Press the
Power
button to stop the operation.
2. Press the
Mode
button to select Cool or Heat mode.
X
In Cool mode, use
Temp +
or
-
button and set the temperature at 16°C.
X
In Heat mode, use
Temp +
or
-
button and set the temperature at 30°C.
Cooling mode (indoor unit check)
*OMFUBJSUFNQ0VUMFUBJSUFNQ'SPN¡,UP¡, JOEJDBUJWFEFMUB5
Heating mode (indoor unit check)
0VUMFUBJSUFNQ*OMFUBJSUFNQ'SPN¡,UP¡, JOEJDBUJWFEFMUB5
In heating mode, the indoor fan motor can remain off to avoid cold air blown into conditioned space.
Pump down procedure (when removing the product)
t "QQSPYJNBUFMZ_NJOVUFTMBUFSPVUEPPSVOJUXJMMTUBSUUPPQFSBUFBOEUIF$PPMPS8BSNBJSXJMMCMPXPVU
t "GUFSNJOVUFTPGTUBUJPOBSZDPOEJUJPODIFDLUIFJOEPPSVOJUBJSUSFBUNFOU
t 8IFOZPVDPNQMFUFUIFJOTUBMMBUJPOTVDDFTTGVMMZIBOEPWFSUIJTNBOVBMUPUIFVTFSGPSTUPSBHFJOBIBOEZBOETBGF
place.
Maldive EUR_AQV09P@_IBIM_32436A_E.indd 39
2010-11-11 15:02:29