background image

Operating Instructions and Installation

3-3

Samsung Electronics

8. COMPULSORY OPERATION : 

For operating the air conditioner without
the remote controller.
*AUTO  :  The operating is the same func-
tion that AUTO MODE in the remote con-
troller. And each time you press the button
the 5WAY func-tion is changed as follow.
STD 

➝ 

NATURE 

➝ 

POWER 

➝ 

SAVING 

SILENCE  

➝ 

POWER OFF

❊ 

STD(standard)(       ) : General operation

Mode

❊ 

NATURE(       ) : The unit is operated

according to health 
pattern control

❊ 

POWER(       ) : The unit is operated in 

powerful state

❊ 

SAVING(       ) : The unit is operated in

power saving state

❊ 

SILENCE(       ) : The unit is operated

quitely

Each mode has Auto, Cool, Heat and SLEEP
operation designed in advance.

9. SWING : BLADE-H is rotated vertically by

the stepping motor.
*Swing Set : Press the       button under the
remote control is displayed on LCD the
and the blades move up and down. If the one
more time press the       button, blades loca-
tion is stop.

10. 24-Hour ON/OFF Real Setting Timer. : The

air conditioner is turned ON at a specified
time using        .
OFF TIMER : The air Conditioner is turned
OFF at a specified time using        .
*ON TIMER  :  Only timer LED lights on.
*OFF TIMER  :  Both timer and operation
LED lights on.

11. SELF Diagnosis

12. BUZZER SOUND : Whenever the ON/OFF

button is pressed or whenever change
occurs to the condition which is set up or
select,  the compulsory operation mode,
buzzer is sounded "beep".

Indoor unit room temperature sensor
error(open or short)

Check Point

LED DISPLAY

TIMER

STD NATURE POWER SAVING

SILENCE

LED

:

blinking

:   LED off

Indoor unit heat exchanger temperature
sensor error(open or short)

Indoor fan mal function

EEPROM error

Option error(option wasn’t set up or 
option data error)

 DB98-04444A(1)-1  4/9/02 2:18 PM  Page 3-3

Содержание AQA07C5(6)ME





























































Отзывы: