using advanced functions
_21
USING THE LONG FUNCTION
Long function will be helpful when you want the cool or warm air to go to much further place.
1.
Turn on the air conditioner.
Press the
Power
button on the remote controller.
2.
Set the operation mode.
Press the
Turbo/Long
button on the remote controller
twice. Long indicator will appear on the remote
controller display.
The air conditioner operates in High fan speed and
automatically adjusts the temperature according to the
current room temperature. The unit operates for
30 minutes and then operates in last used mode, or in
Auto mode if Dry/Fan mode is most recent mode used.
• Long function is only available in Auto/Cool/Heat* mode. If Long function is selected in
Dry/Fan mode, operation mode changes to Auto.
(*Heat mode is applicable for AP30N1A model only.)
• When using Long function, the air flow blades face upward and vertical air flow direction
control is not possible.
• You cannot use Turbo and Long function at the same time.
To deactivate Long function
1.
Press the
Turbo/Long
button on the remote controller while Long function is on.
The air conditioner operates in last used mode, or in Auto mode if Dry/Fan mode is most
recent mode used.
•
While you are using the remote controller, make sure corresponding indicator appears on
the remote controller display.
•
Press
Temp
or
button to adjust desired temperature. Each time you press the
button, the temperature changes by 1°C.
•
Fan speed is set as High only and cannot be adjusted in Long function.
•
In Long function, air flow can be adjusted in horizontal direction only (see page 19 for
instructions).
AP28N0A_IB_E_31713-1.indd 21
2010-02-10 ｿﾀﾈﾄ 12:48:25
