operating
_15
Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan
speed to feel cooler in hot season.
1.
Turn on the air conditioner.
Press the
Power
button on the remote controller.
2.
Set the operation mode.
Press the
Mode
button on the remote controller until
Cool mode indicator appears on the remote controller
display.
The air conditioner operates in Cool mode and it will
lower the temperature in your room.
• Cooling only model(AP
N0A): Each time you
press the
Mode
button, the mode will change in order of Cool
Auto
Dry
Fan.
• Heat pump model(AP
N1A): Each time you press the
Mode
button, the mode will
change in order of Auto
Cool
Dry
Fan
Heat.
3.
Set the temperature.
Press the
Temp
or
button on the remote controller
to increase or decrease the desired temperature.
You can set the desired temperature between
the range of 18˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4.
Set the fan speed.
Press the
Fan
or
button on the remote controller
to set the desired fan speed.
If room temperature reaches desired value, the air
conditioner will shut off cooling for a while and just the
fan runs.
Each time you press the
Fan
or
button,
fan speed will change in order of Auto, Low, Medium
and High.
•
While you are using the remote controller, make sure correct indicator which matches
your selection appears on the remote controller display.
•
Air flow can be adjusted manually (see page 19 for instructions).
•
If current outside temperatures are much higher than the selected indoor temperature,
it may take time to bring the inner temperature to the desired coolness.
•
If you operate the air conditioner right after stopping the cooling operation or the
temperature reaches to the desired temperature, cool air will not come out around
3 minutes for compressor protection.
AP28N0A_IB_E_31713-1.indd 15
2010-02-10 ｿﾀﾈﾄ 12:48:13
