23
ENGLISH
Preparation for installation
You must check the model names of the indoor and outdoor units.
Indoor
outdoor unit type and combination
Capacity(Btu/h)
Type
Model name
75k
Indoor unit
AP80S0
N
Outdoor unit
AP80S0
X
96k
Indoor unit
AP0AS0
N
Outdoor unit
AP0AS0
X
Moving the outdoor unit
X
f
Select the moving route in advance.
X
f
Be sure that moving route is safe from weight of the outdoor unit.
X
f
Do not slant the product more than 30° when carrying it. (Do not lay the product down sideways.)
X
f
The surface of the heat exchanger is sharp. Be careful not to get injured during moving and installing the product.
When moving with a crane
• Fasten the wire rope as shown in the figure.
• To protect damage or scratches, insert a piece of cloth between the outdoor unit and the wire rope.
Wire rope
Plate protection cloth
Outdoor unit leg
When moving with a fork lift
• Insert the fork into the holes at the bottom of the outdoor unit carefully.
• Be careful that the fork does not damage the outdoor unit.
Holes for fork lift
Fork lift
PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 23
2015-04-23 오후 2:18:56