Samsung AP-3607BR Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 36

Samsung AP-3607BR Скачать руководство пользователя страница 29

E-

28

This unit is greater in height compared to its width, and thus it may fall down.
Therefore, be sure to fix the unit to the wall and floor surfaces securely to prevent the unit from falling down.

●

Fix the unit using the installation plate separately supplied.

1. Place the indoor unit on the installation plate.
2. Remove the inlet grille of the indoor unit.
3. Fix the units to the nut of the installation plate at three

points using the hand bolt as shown on the right figure.

B

A

Nut

Outdoor unit leg
Leg Holder
Foot Holder

●

Fix the unit using the fixing holders separately supplied.

1. Bend the fixing holder as shown in the right figure.
2. Fix the fixing holder to the screw on the upper part of the

indoor unit.

3. Fix the unit to the wall surface using the screw or anchor bolt.

(The screw of the fixing holder is

Ø

6mm in diameter.)

1.Fix the unit on a flat, rigid floor using the anchor bolt.

(Anchor bolt : M10 x 4 points - separately purchased)

1. Insert the foot holder (4EA).
2. Remove the nut fastened to the leg holder,

and then insert the leg holder into the hole of
the outdoor unit leg.

3. Fix the unit securely with the nut.

Anchor bolt fixing dimensions

A

660(26)

B

335(13

5

)

Unit : mm(inch)

Model

AP-3607BR

Indoor Unit

Outdoor Unit

Fixing to the floor

Fixing to the wall

When using the anchor bolt

When using the leg holder of the outdoor unit

INSTALLATION METHOD

INSTALLATION METHOD

1
5

«
...
27
28
29
30
31
...
»

Содержание AP-3607BR





































Отзывы:

Нет отзывов