❚
Adding a HUB
Your WAM speaker and a HUB may not pair successfully if your speaker and the HUB are too
far apart or are on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.
The additional HUB amplifies the signal and lets you pair your speaker to the closest HUB.
1
Set the HUB that is connected to the wireless router
to Pairing mode by pressing its
SPK ADD
button for 1
second.
2
Plug in the new HUB you are using as an extender,
and then press its
SPK ADD
button for 10 seconds.
3
The newly added HUB's LED indicators turn off and
on, and it switches to Repeater mode.
4
Once the connection between the two HUBs has been
established, the added HUB's (
) indicator stops
blinking.
NOTES
9
If your smart device is not connected to the wireless router
with a Wi-Fi connection, your WAM speaker will not appear
on the
Samsung Multiroom
app.
9
Place the HUB that is in Repeater mode in an appropriate
location between the speaker and the HUB that is connected to the wireless router.
9
You can set only one HUB to Repeater mode.
Relocating the product
When relocating your WAM speaker, refer to the below table.
Wireless router
HUB
If you want to connect your WAM
speaker to the current wireless router.
If you want to connect your WAM
speaker to a different wireless router
Without a HUB
Turn off the speaker, relocate it and then
turn it on.
Turn off the speaker, relocate it, then
establish the new connection as described
in the installation instructions on pages 9
through 15.
Click here.
With a HUB
Connect a LAN cable between the HUB
and the new wireless router, turn on the
HUB, and then turn on the speaker.
Product
HUB
Used as a
extender
19
44
Содержание AM7500
Страница 21: ...7 Your additional new speaker is added 21 44 ...
Страница 49: ... Ungrouping Press Ungroup 49 44 ...