Selecting a location for installation
f
f
Select a location for installation that satisfies the following conditions and customer demands .
1 . A place where air can be well distributed .
2 . A place where air can pass through without any interference .
3 . A place where condensed water can be well drained .
4 . A place where maintenance of the product can be carried out without inconvenience .
5 . A place where enough length of pipe (within the allowable length) can be installed between the indoor unit and outdoor
unit .
6 . The product should be installed on even and sturdy floor .
7 . The product should not be installed in a humid place such as entrance door or kitchen .
8 . The product should not be exposed to the sunlight . (If necessary, place a sunshade for the product .)
- Otherwise, the surface of the product may discolor due to the direct sunlight .
Required space for product installation
f
f
To use the installation space efficiently, refer to the 'Corner installation' as shown below .
(Unit: mm)
Top view
600 or more
Front side
Side view
600 or more
Front side
1000 or more
Air outlet
Air inlet
ENGLISH-7
01
PREAP
AR
ATI
o
N
DVM SUPER_IM_05684A-00_EN.indd 7
2016-04-01 오전 9:00:52
