E-
8
Concrete
Suspension bolt(ø9.52(3/8") or M10)
Hole in anchor
Hole in plug
Insert
Ceiling support
It is recommended to install the Y-joint before installing the indoor unit.
1
Place the pattern sheet on the ceiling at the spot where you want to
install the indoor unit.
Since the diagram is made of paper, it may shrink or stretch
slightly due to temperature or humidity. For this reason,
before drilling the holes maintain the correct dimensions
between the markings.
Note
2
Insert bolt anchors, use existing ceiling supports or construct a suitable
support as shown in figure.
3
Install the suspension bolts depending on the ceiling type.
Ensure that the ceiling is strong enough to support
the weight of the indoor unit. Before hanging the unit,
test the strength of each attached suspension bolt.
If the length of suspension bolt is more than 1.5m (4.92 ft),
it is required to prevent vibration.
If this is not possible, create an opening on the false ceiling
in order to be able to use it to perform the required operations
on the indoor unit.
Indoor Unit Installation
미주향_DVMS_1Way Cassette_IM_EN_03806A(1).indd 8
2013-03-06 오후 5:58:19