82
Installing and setting the option with tact switch and explanation of the functions
Setting the option
1 . Press and hold K2 to enter the option setting . (Only available when the operation is stopped)
- If you enter the option setting, display will show the following . (If you have set the 'Emergency operation for compressor
malfunction', 1 or 2 will be displayed on Seg 4 .)
- Seg 1 and Seg 2 will display the number for selected option .
- Seg 3 and Seg 4 will display the number for set value of the selected option .
2 . If you have entered option setting, you can shortly press the K1 switch to adjust the value of the Seg 1, Seg 2 and select
the desired option . (Refer to pages 83~85 for the Seg number of the function for each option)
Example)
3 . If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and change
the function for the selected option . (Refer to pages 83~85 for the Seg number of the function for each option)
Example)
4 . After selecting the function for options, press and hold the K2 switch for 2 seconds . Edited value of the option will be
saved when entire segments blinks and tracking mode begins .
• Edited option will not be saved if you do not end the option setting as explained in above instruction .
CAUTION
❋
❋
While you are setting the option, you may press and hold the K1 button to reset the value to previous setting .
❋
❋
If you want to restore the setting to factory default, press and hold the K4 button while you are in the option setting
mode .
- If you press and hold the K4 button, setting will be restored to factory default but it doesn't mean that restored setting
is saved . Press and hold the K2 button . When the segments shows that tracking mode is in progress, setting will be
saved .
Setting outdoor unit option switch and key function