18
A
High Temp Button
High Fan Button
Mode change
Low Temp Button
Low Fan Button
Entering mode for
setting option
Option setting mode
X
Setting
option
1. Remove batteries from the remote controller.
2. Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button.
3. Each time you press Low Fan button, 7-seg on left side is increased by “1” and each time you press High Fan button,
7-seg on right side is increased by “1”.
4. You press
button to move to the next setteing page.
5. After setting option, press
button to check whether the option code you input is correct or not.
6. Press operation button
with the direction of remote control for set.
• SEG1, SEG7, SEG13, SEG19 are not set as page option.
• Set the SEG1, SEG7 as ON status and SEG13, SEG19 as OFF status.
EX) Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting
option at the same time.
¤
¤
¤
¤
¤
¤
¤
¤
¤
Setting option
(AJ**JNND**/AJ**JNAD**)
Setting indoor unit address manually
Setting indoor unit address
mqtvGhqWZ]qjq\ptluki]_TW\WXZhTWWUGGGX_
YWX[TXYTX^GGG㝘㤸GXXa\[a[_
