Samsung AJ009JNNDCH FJM series, Руководство по обслуживанию

Страница: 64 / 118

4-10 Samsung Electronics
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power
supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Before installing the indoor unit, assign an option to the indoor unit according
to the air conditioning system plan.
- The default setting of an indoor unit installation option is “02000-100000-200000-300000”.
- Individual control of a remote controller(SEG20) is The function that controls an indoor unit individually when there is
more than one indoor unit.
4. Set the indoor unit option by wireless remote controller.
- When entering Address option, connect remote controller receiver.
Setting an indoor unit installation option (suitable for the condition of each installation location)
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE Central control
Indication and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 2 0 0
0 No use
0
1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Master / Slave
Indication and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
1 0 0 0 0
0 Slave
1 Master
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE External control External control output Buzzer
Indication and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
2
0 No use
0 Thermo ON
0
0 Use
0
1 On/Off control
2 Off control
1 Operation ON 1 No Use
3 Window On/Off control1)
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE
Indication and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
3 0 0 0 0 0
▶ If you input a number other than 0~4 of the individual control of the indoor unit(SEG20), the indoor is set as "indoor 1".
t8IFOi"w_w'wJTFOUFSFEUP4&(_UIFJOEPPSVOJU."*/"%%3&44JTOPUDIBOHFE
t*GZPVTFUUIF4&(BTUIFJOEPPSVOJUXJMMNBJOUBJOUIFQSFWJPVT."*/"%%3&44FWFOJGZPVJOQVUUIFPQUJPOWBMVFPG4&(_
t*GZPVTFUUIF4&(BTUIFJOEPPSVOJUXJMMNBJOUBJOQSFWJPVT3.$"%%3&44FWFOJGZPVJOQVUUIFPQUJPOWBMVFPG4&(_
5. The MAIN address is for commnication between the indoor unit and the outdoor unit. Therefore, you must set it to
operate the air conditioner properly.
Indoor Unit
1(L)
2(N)
F2
F1
1) Th e window on/off function applies to the following unit
- AJN**/AR**