
5
AA
ENGLISH
Deciding on where to install the indoor unit
◆
There must be no obstacles near the air inlet and outlet.
◆
Install the indoor unit on a ceiling that can support its weight.
◆
Maintain sufficient clearance around the indoor unit.
◆
Make sure that the water dripping from the drain hose runs away correctly and safely.
◆
The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
◆
After connecting a chamber, insulate the connection part between the indoor unit and the chamber with t10
or thicker insulation. Otherwise, there can be air leak or dew from the connection part.
■
Construction Standard for Inspection Hole
1) In case, the ceiling is tex tile, Inspection hole dose not need.
2) In case, the ceiling is plaster board, Inspection hole depends on Inside height of the ceiing.
a. Height is more than 1.64ft (0.5m) : Only "B" [Inspection for PBA] is applied.
b. Height is less than 1.64ft (0.5m) : Both "A"&"B" are applied.
c. "A"&"B" are inspection holes .
Indoor unit
Space requirements for installation & service
Unit Width(W)
"A"=W+3.94 inch (100mm)
Unit Depth(D
)
"B"=19.69 inch
(500mm)
z
:PVNVTUIBWFJODI NNPSNPSFTQBDFCFUXFFOUIFDFJMJOHBOEUIFCPUUPNPGJOEPPSVOJU0UIFSXJTF
UIFOPJTFGSPNUIFWJCSBUJPOPGJOEPPSVOJUNBZCPUIFSUIFVTFS8IFOUIFDFJMJOHJTVOEFSDPOTUSVDUJPOUIF
IPMFGPSDIFDLVQNVTUCFNBEFUPUBLFTFSWJDFDMFBOBOESFQBJSUIFVOJU
z
It is possible to install the unit at an height of between 7.2~8.2 ft(2.2~2.5m) from the ground,
JGUIFVOJUIBTBEVDUXJUIBXFMMEFGJOFEMFOHIU<JODI NNPSNPSF>UPBWPJEGBONPUPSCMPXFSDPO
-
tact.
z
*GZPVJOTUBMMUIFDBTTFUUFPSEVDUUZQFJOEPPSVOJUPOUIFDFJMJOHXJUIIVNJEJUZPWFSZPVNVTUBQQMZFYUSB
0.39inch(10mm) of polyethylene foam or other insulation with similar material on the body of the indoor unit.
NN
NN
(0.79 inch) or more
(0.79 inch) or more