48
Electrical work
How to connect your extended power cables
f
f
Items to prepare
Tools
Crimping plier
Connection sleeve (mm)
Insulation tape
Contraction tube (mm)
Spec
MH-14
20xØ6.5(HxOD)
Width 19mm
70xØ8.0(LxOD)
Shape
1. As shown in the figure, peel off the shields from the rubber/wire of the power
cable.
- Peel off 20mm of the wire shields of the tube installed already.
(Unit: mm)
120
60
20
20
20
180
Power cable(provided by us)
20
Power cable (provided by us)
2. Insert both sides of core wire of the power cable into the connection sleeve.
f
f
Method 1
Push the core wire in to the sleeve from both sides.
Connection sleeve
• After peeling off the tube wire, you must insert a contraction tube.
CAUTION
f
f
Method 2
Twist the wire cores together and push it in to the sleeve.
Connection sleeve
3. Using a compressor, compress the two points and flip it over and compress another two points in the same location.
- The compression dimension should be 8.0.
- After compressing it, pull both sides of the wire to make sure it is firmly pressed.
Comp. dim.
f
f
Method 1
Compress it 4 times
5mm
f
f
Method 2
Compress it 4 times
5mm
4. Wrap it with the insulation tape twice and position your contraction tube in the middle of the insulation tape.
f
f
Method 1
40mm
Insulation tape
f
f
Method 2
Insulation tape
35mm
칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 48
2014-03-12 오전 9:33:17
