
Connecting the Drain Hose to the Outdoor Unit
Fixing the Unit in Position
The outdoor unit must be installed on a rigid and stable base to avoid any
increase in the noise level and vibration, particularly if the outdoor unit is to
be installed close to a neighbour. If it is to be installed in a location exposed to
strong winds or at a height, the unit must be fixed to an appropriate support
(wall or ground).
Position the outdoor unit so that the air flow is directed towards the
outside.
1
Attach the outdoor unit to the appropriate support using anchor bolts.
2
If the outdoor unit is exposed to strong winds, install shield plates around
the outdoor unit, so that the fan can operate correctly.
3
(26")
660mm
(13
")
340mm
3
8
E-
50
When using the air conditioner in the heating mode, ice may accumulate.
During de-icing, the condensed water must be drained off safely.
Consequently, you must install a drain hose on the outdoor unit,
following the instructions below.
(1
")
30mm
1
5
(2" )
50mm
Make space more than 50mm(2in) between the bottom of the outdoor unit
and the ground for installation of the drain hose, as shown in figure.
1
Insert the drain plug into the hole on the underside of the outdoor unit.
2
Connect the drain hose to the drain plug.
3
Ensure that the drained water runs off correctly and safely.
4
Содержание ACH2400C
Страница 5: ...Air inlet Rear Air outlet Connection valve Outdoor Unit E 5 ENGLISH ...
Страница 35: ...E 35 INSTALLATION MANUAL ...
Страница 71: ...Memo E 71 ENGLISH ...