Samsung AC052MN4DKH, Руководство по установке

Страница: 20 / 32

20
Installation Procedure
Ins
tallation Pr
oc
edur
e
English
Step 14 Setting the indoor unit
addresses and the installation options
You cannot set both of the indoor unit addresses and
the installation options in a batch: set both of them
respectively.
Common steps for setting the addresses and
options
MR-EC00 and MR-EH00 remote controls
Low Temp button
High Temp button
Mode button
Low Fan button
High Fan button
Setting the
option values
Entering the
mode for setting
the options
NOTE
ŷ The remote control display and buttons may vary
depending on the model.
1
Enter the mode for setting the options:
a
Remove the batteries from the remote control,
and then insert them again.
b While holding down the (High Temp) and
(Low Temp) buttons simultaneously, insert the
batteries into the remote control.
c Make sure that you are entered to the mode for
setting the options:
2 Set the option values.
CAUTION
ŷ The total number of available options are 24: SEG1 to
SEG24.
ŷ
Because SEG1, SEG7, SEG13, and SEG19 are the page
options used by the previous remote control models,
the modes to set values for these options are skipped
automatically.
ŷ
Set a 2-digit value for each option pair in the
following order: SEG2 and SEG3
ĺ SEG4 and SEG5
ĺ
SEG6 and SEG8
ĺ
SEG9 and SEG10
ĺ
SEG11 and
SEG12
ĺ
SEG14 and SEG15
ĺ
SEG16 and SEG17
ĺ
SEG18 and SEG20
ĺ
SEG21 and SEG22
ĺ
SEG23 and
SEG24
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 X X X X X
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 X X X X X
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2 X X X X X
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3 X X X X X
On (SEG1 to SEG12) Off (SEG13 to SEG24)
jhj†|•Œ™šˆ“GXˆ•‹[žˆ †l|†pt†l•ŽU•‹‰GGGYW YWX]TXXTWYGGG㝘䟸GZaY[a\\