Samsung AC052MN4DKH, Руководство по установке

Страница: 10 / 32

10
Installation Procedure
Ins
tallation Pr
oc
edur
e
English
Step 4 Installing the indoor unit
When deciding on the location of the air conditioner the
following restrictions must be taken into account.
1 Place the pattern sheet on the ceiling at the spot
where you want to install the indoor unit.
NOTE
ŷ
Since the diagram is made of paper, it may shrink
or stretch slightly due to temperature or humidity.
For this reason, before drilling the holes, be sure
to maintain the correct dimensions between the
markings.
2 Insert bolt anchors, use existing ceiling supports or
construct a suitable support as shown in figure.
Concrete
Hole in anchor
Hole in plug
Suspension bolt (M8) - field supply
Insert
3 Install the suspension bolts, depending on the ceiling
type.
Ceiling support
CAUTION
ŷ
Make sure that the ceiling is strong enough to support
the weight of the indoor unit. Before hanging the
unit, test the strength of each attached suspension
bolt.
ŷ
If the length of the suspension bolt is more than 1.5
m, you are required to prevent vibration.
4
Screw eight pairs of nuts and washers to the
suspension bolts, making space for hanging the
indoor unit.
CAUTION
ŷ
You must install all of the suspension rods.
ŷ
It is important to leave sufficient space in the false
ceiling to allow access for maintenance or repairs to
the drainage pipe connection, the refrigerant pipe
connection, or to remove the unit if necessary.
5
Hang the indoor unit to the suspension bolts between
two nuts. Cut a pad stopper and place it on the
suspension bolts to hold the washers. Remove the
stopper and screw the nuts to fix the unit.
1
2
2
6 Adjust the unit to the appropriate position, taking into
account the installation area for the front panel.
ŷ
Place the pattern sheet on the indoor unit.
ŷ
Adjust the space between the ceiling and the
indoor unit by using a dimension gauge.
ŷ Fix the indoor unit securely after adjusting the
level of the unit by using a leveller.
ŷ
Remove the pattern sheet, connect the other
cables. and install the front panel.
jhj†|•Œ™šˆ“GXˆ•‹[žˆ †l|†pt†l•ŽU•‹‰GGGXW YWX]TXXTWYGGG㝘䟸GZaY[a\X