Outdoor Units
11. Installation
Connecting the main power cable
ߢߢ
k͝˝̷̈ϑ˵
Ã͝ϑϩɇ̷
̷ɇϩ̈ͱ͝ťθ
ͱʀʪʒЇθ
ʪ
Aͱ͝͝ʪʀϩ̈͝˝ϩ˵ʪ͔ɇ̈͝Χͱиʪθʀɇɵ̷ʪ
Ɗʪϩϩ̈͝˝ϑЇ̈ʒʪ
Aͱ͔͔Ї̈͝ʀɇϩ̈ͱ͝ʀɇɵ̷ʪ
࣍ĮЇϩʒͱͱθϩͱ²Ƹ
Aͱ͝ϩθͱ̷Ƹ̈͝ϩ࣎
²ƸAͱ͝ϩθͱ̷Ƹ̈͝ϩ
Aɇɵ̷ʪϩ̈ʪ
k̷ʪʀϩθ̈ʀɇ̷
ʀͱ͔Χͱ͝ʪ͝ϩɵͱу
đɇ̈͝Χͱиʪθ
ʀɇɵ̷ʪ
ߢࡡߣ
øࡡĘ
Ɵ˵ʪɇΧΧʪɇθɇ͝ʀʪͱ˙ϩ˵ʪЇ̈͝ϩ͔ɇцɵʪʒ̈˙˙ʪθʪ͝ϩ
˙θͱ͔ϩ˵ʪΧ̈ʀϩЇθʪʒʪΧʪ͝ʒ̈͝˝ͱ͝ϩ˵ʪ͔ͱʒʪ̷ࢋ
ťͱиʪθϑЇΧΧ̷ц
ø
ߢ
Ę
ߣ
køA9
AƸƟÃĮĘ
࡙ ǽͱЇϑ˵ͱЇ̷ʒʀͱ͝͝ʪʀϩϩ˵ʪΧͱиʪθʀɇɵ̷ʪ̈͝ϩͱϩ˵ʪΧͱиʪθʀɇɵ̷ʪϩʪθ͔̈͝ɇ̷ɇ͝ʒ˙ɇϑϩʪ̈͝ϩӥϩ˵ɇʀ̷ɇ͔Χࢋ
࡙ Ɵ˵ʪЇ͝ɵɇ̷ɇ͝ʀʪʒΧͱиʪθ͔Їϑϩɵʪ͔ɇ̈͝ϩɇ̈͝ʪʒӥϩ˵̈͝ߣज़ͱ˙ϑЇΧΧ̷цθɇϩ̈͝˝ࢋ
࡙ Ã˙ϩ˵ʪΧͱиʪθ̈ϑЇ͝ɵɇ̷ɇ͝ʀʪʒ˝θʪɇϩ̷цࡡ̈ϩ͔ɇцϑ˵ͱθϩʪ͝ϩ˵ʪ̷̈˙ʪͱ˙ϩ˵ʪʀͱ͝ʒʪ͝ϑʪθࢋÃ˙ϩ˵ʪЇ͝ɵɇ̷ɇ͝ʀʪʒΧͱиʪθ̈ϑʪуʀʪʪʒʪʒͱЭʪθ
ߥज़ͱ˙ϑЇΧΧ̷цθɇϩ̈͝˝ࡡϩ˵ʪ̈͝ʒͱͱθЇ̈͝ϩ̈ϑΧθͱϩʪʀϩʪʒࡡϑϩͱΧΧʪʒɇ͝ʒϩ˵ʪʪθθͱθ͔ͱʒʪ̈͝ʒ̈ʀɇϩʪϑࢋ
࡙ ƟͱΧθͱϩʪʀϩϩ˵ʪΧθͱʒЇʀϩ˙θͱ͔иɇϩʪθɇ͝ʒΧͱϑϑ̈ɵ̷ʪϑ˵ͱʀ̧ࡡцͱЇϑ˵ͱЇ̷ʒ̧ʪʪΧϩ˵ʪΧͱиʪθʀɇɵ̷ʪɇ͝ʒϩ˵ʪʀͱ͝͝ʪʀϩ̈ͱ͝ʀͱθʒͱ˙
ϩ˵ʪ̈͝ʒͱͱθɇ͝ʒͱЇϩʒͱͱθЇ̈͝ϩϑӥϩ˵̈͝ʒЇʀϩϑࢋ࣍ӥϩ˵ɇΧΧθͱΧθ̈ɇϩʪÃťθɇϩ̈͝˝ɇ͝ʒ͔ɇϩʪθ̈ɇ̷ϑʪ̷ʪʀϩ̈ͱ͝˙ͱθцͱЇθɇΧΧ̷̈ʀɇϩ̈ͱ࣎͝
࡙ k͝ϑЇθʪϩ˵ɇϩ͔ɇ̈͝ϑЇΧΧ̷цʀͱ͝͝ʪʀϩ̈ͱ̈͝ϑ͔ɇʒʪϩ˵θͱЇ˝˵ɇϑӥϩʀ˵ϩ˵ɇϩʒ̈ϑʀͱ͝͝ʪʀϩϑɇ̷̷Χͱ̷ʪϑࡡӥϩ˵ʀͱ͝ϩɇʀϩ˝ɇΧͱ˙ɇ̷ʪɇϑϩ
ߡࢋߢߣ̈͝ʀ˵࣍ߤ͔͔࣎ࢋ
࡙ UʪӬʀʪϑʒ̈ϑʀͱ͝͝ʪʀϩʪʒ˙θͱ͔ϩ˵ʪΧͱиʪθϑЇΧΧ̷цϑ˵ͱЇ̷ʒɵʪʀͱ͔Χ̷ʪϩʪ̷цʒ̈ϑʀͱ͝͝ʪʀϩʪʒ̈͝ϩ˵ʪʀͱ͝ʒ̈ϩ̈ͱ͝ͱ˙ͱЭʪθЭͱ̷ϩɇ˝ʪ
ʀɇϩʪ˝ͱθцࢋ
࡙ çʪʪΧʒ̈ϑϩɇ͝ʀʪϑͱ˙ߢࢋߪߨ̈͝ʀ˵࣍ߦߡ͔͔࣎ͱθ͔ͱθʪɵʪϩиʪʪ͝Χͱиʪθʀɇɵ̷ʪɇ͝ʒʀͱ͔͔Ї̈͝ʀɇϩ̈ͱ͝ʀɇɵ̷ʪࢋ
ki]_TXYW][hTWWptjhjG| GvhhluUGGGXX
ki]_TXYW][hTWWptjhjG| GvhhluUGGGXX
YWYYTXWTY]GGG㝘㤸G_aX]aX[
YWYYTXWTY]GGG㝘㤸G_aX]aX[
CAUTION
•
You should connect the power cable into the power cable terminal and fasten it with a clamp.
•
The unbalanced power must be maintained within 2% of supply rating.
•
If the power is unbalanced greatly, it may shorten the life of the condenser.
•
To protect the product from water and possible shock, run the power cable and the communication cable
within the appropriate weatherproof conduit and fittings.
•
Ensure that main supply connection is made through a switch that disconnects all poles, with contact
gap of a least 0.12 inch(3mm).
•
Devices disconnected from the power supply should be completely disconnected in the condition of
overvoltage category.
•
Keep distances of 1.97 inch(50mm) or more between power cable and communication cable.
