143
Settings
6
6 Settings
6.11.4
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Setting Standby Control
1
Press
MENU
on the remote control.
2
Press
/
to move to
Setup
and press [
].
3
Press
/
to move to
Advanced Settings
and press [
].
4
Press
/
to move to
Standby Control
and press [
].
5
Press
/
to move to the option you want and press [
].
z
Auto
Power-saving mode will activate if no input signals are detected even though a source device is
connected to the display.
The message "
No Signal
" will appear if no source device is connected.
z
On
Power-saving mode will activate if no input signals are detected.
z
Off
The message "
No Signal
" will appear if no input signals are detected.
6
The selected option will be applied.
z
The Standby Control option is only enabled when
Source
is set to
PC
or
DVI
.
z
If "
No Signal
" is displayed although a source device is connected, check the cable connection.
Refer to page 56 for details about connecting source devices.
S t a n d b y C o n t r o l
M o v e
E n t e r
R e t u r n
A u t o
O f f
O n
