Samsung 300E4A Скачать руководство пользователя

Страница: 81 / 128

Chapter 3.

Settings and Upgrade

Battery

Please refer to the following instructions when running the

computer on battery power without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.

Carefully read and follow the precautions printed on the

•

battery before using the battery.
Before using your computer for the fi rst time after

•

purchasing it, charge the battery completely.
The images used for the illustration are of a representative

•

model, therefore the images may diff er from the the actual

product.

Precautions

Use only chargers specifi ed in the User Manual.

•

Never heat the battery pack, put it near or in a fi re or use at

•

a temperature higher than 60°C, as this may cause fi re.
Never cause a short circuit between the battery pack

•

terminals or disassemble the battery pack.
Carefully read and follow the precautions printed on the

•

battery and the safety instructions in the User Manual

before using the battery.
Please refer to the system operation environment of

•

this manual and operate and store the battery at room

temperature.

Installing/Removing the Battery

Shutdown the system, close the LCD panel and place the

computer upside down on a fl at surface.

Pull the two battery latches

outwards

, then remove the

battery.

To install the battery again, slide the battery into the system.

The battery latches move inwards and fi x the battery

automatically.

Check if the battery latch has been moved inwards.

Содержание 300E4A

































































































































Результаты поиска

Содержание 300E4A

Отзывы:

Похожие инструкции для 300E4A

Бренды по названию

Популярные бренды

Samsung 300E4A, Руководство пользователя

Результаты поиска

Содержание 300E4A

Отзывы:

Похожие инструкции для 300E4A

Бренды по названию

Популярные бренды