8
Guided Tour - UR-4 Rear Panel
3: Unbalanced output* - Use this unbalanced high impedance (5K
Ohm) 1/4” jack when connecting the UR-4 to consumer (-10) audio
equipment. Wiring is as follows:
4: Rear-mount antenna knockouts - The receiver antennas can
optionally be mounted at these areas of the rear panel. Contact
Samson Technologies for information about our rear-panel antenna
mounting kit.
* If required, both the balanced and unbalanced outputs can be used
simultaneously.
+ SIGNAL
GROUND
+ SIGNAL
GROUND
