Samson SASM4, Руководство пользователя

Страница: 8 / 12

8
1. DC Input - Connect the supplied power adapter here, using the strain relief* as
shown in the illustration below. WARNING: Do not substitute any other kind of
power adapter. Doing so can cause severe damage to the SM4 and will void your
warranty.
2. BAL MIC INPUT - Use this Combo XLR plus 1/4” jacks to connect a microphone or
wireless microphone receiver. The XLR input provides 15-volt phantom power for
use with condenser microphones.
3. Stereo RCA MUSIC INPUT - Stereo line level input for connecting the output of de-
vices such as MP3, CD, or any line level audio device using standard RCA cables.
4. VOICEOVER HOLD - This knob controls the hold time of the VOICEOVER priority
ducking from 0.5s–3s.
5. MASTER VOLUME - The MASTER VOLUME knob controls the overall output level.
This knob determines the final output signal level. Signals from all channels are
routed here just before being routed to the OUTPUT jacks.
6. Balanced XLR OUTPUT - Balanced XLR outputs to connect the SM4 to a power
amplifier or speakers. In recording applications, these outputs can be used to
connect to a stereo device such as computer sound card, MP3, or hard disk
recorder. The signal at the OUTPUT jacks follow the MASTER VOLUME control.
7. STEREO / MONO Switch - When the switch is in the out, STEREO position, the
left and right signals are routed to the corresponding outputs. In the in, MONO,
position, the left and right input signals are summed together and fed to both
Left and Right OUTPUT jacks.
8. Unbalanced RCA OUTPUT - Unbalanced RCA outputs to connect the SM4 to a
power amplifier or speakers. In recording applications, these outputs can be used
to connect to a stereo device such as computer sound card, MP3, or hard disk
recorder. The signal at the OUTPUT jacks follow the MASTER VOLUME control.
Rear Panel Callouts
*Using the strain relief: Gather up a loop of wire and pass it
through the strain relief, then pass the adapter plug through
the loop in order to create a knot.