EN
FR
DE
ES
IT
Setup
The MD1 can be quite useful on stage or in the studio for connecting unbalanced audio sources or
instruments with pickups. By utilizing the MD1, the signal can be sent cleanly for long distances while
benefiting from the low noise and common mode rejection provided by the balanced low-level output.
The diagram following shows a typical hook-up for an acoustic guitar connected to an acoustic guitar
amplifier and a PA system.
•
Set the volume controls of your audio
system to the off position.
•
Connect your instrument or other
audio source to the MD1 INPUT jack.
•
Connect the THRU output to a
monitor speaker or sub-mixer.
•
Connect the BALANCED OUTPUT to
the microphone input of a mixer or
other audio device.
•
Raise the level of the audio system to
the appropriate level.
•
If you hear a hum or buzz set the
GROUND LIFT switch to the LIFT
position.
00-09 HALL
Содержание MD1 Direct Box
