background image

22

L1200 and L2000 Features

The Samson L1200 and L2000 consoles are 

comprehensive and great sounding, making them 

the ideal choice for a variety of live sound and 

recording applications. Here are some of their main 

features:
•   The L1200 and L2000 are twelve and twenty 

channel mixers in ergonomically correct, table-

top enclosures providing easy to see and easy to 

operate front panel controls. 

•   Ample inputs, the L1200 has eight mic/line inputs 

plus two stereo line inputs, while the L2000 

features sixteen four mic/line inputs plus two 

stereo line inputs. Plus dedicated stereo returns 

for the onboard effects.

•   Two additional mic preamplifiers on the stereo 

channels brings the total number of mic inputs to 

ten on the L1200 and eighteen on the L2000.

•   On board, bi-directional USB interface for 

recording to a computer based Hard Disk system. 

The Output routing can be selected from MAIN 

mix or AUX 1 - 2, and the Input routing can be 

from the MAIN mix or last stereo channel.

•   Custom designed, smooth feel 60mm faders on 

all channels, buses, mono and left and right main 

outputs.

•   The L series have 24-bit DSP (Digital Signal 

Processor) multi-effects processors with 100 

selectable presets offering dazzling studio quality 

effects including Reverb, Delay, Chorus and 

Flanging. 

•   The L Series mixers feature high-quality, low-

noise, discrete microphone pre-amplifiers that 

can accept signals from most any standard 

microphone. Condenser microphones are

   connected easily using the available 48 Volt 

Phantom Power.

•   Each of the L1200 and L2000’s mono mic / line 

channels feature Gain control, Low Cut filter, a 

three-band equalizer with variable mid-range 

control enabling you to tailor the tonal response 

of each input, and a convenient Insert Point jack 

to patch in external effects.

•   The L Series has 4 auxiliary sends. Two dedicated 

pre -fader aux sends for monitors, plus a third aux 

send that can be set up to be either a monitor 

send or an effects send using the Pre/Post switch, 

and an additional EFX send for sending to the 

internal multi-effects processors. 

•   Twelve segment LED Meters which can be 

switched to display Main left and right or PFL and 

Solo.

•   The brilliant sound quality is achieved thanks to 

the advanced circuit design, utilizing low-noise 

operational amplifiers and low impedance busing.

•   Durable steel enclosure is road tough insuring 

reliable performance from night to night and 

venue to venue.

•  Three-year extended warranty.

Содержание L2000

























Отзывы: