Samson foundation 3787 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 96

Samson foundation 3787 Скачать руководство пользователя страница 40

7.4.1 Resource Block

The Resource Block contains all the data that clearly identifies the device. It is, so to speak,
the electronic nameplate of the device.
The Resource Block’s parameters include, for example, device type, device name, manufac-
turer ID, serial number as well as parameters which affect the behavior of all other Blocks in
the device.

Parameters of the Resource Block

Storage class:
ACK_OPTION

S

Index: 38
Access: r, w
Options:

Default:

This parameter allows you to choose whether an alarm associated with this block
should be automatically acknowledged, i.e. without any influence from fieldbus host
system.
Undefined

No option

DISC ALM

Write protection has been changed

BLOCK ALM

Block alarm

Undefined
Note: The alarm is sent to the fieldbus host system, but it is not acknowledged by it.

ALARM_SUM

S

Index: 37
Access: r, w
Display:

Shows current status of process alarms in the Resource Block.

DISC ALM

Write protection has been changed

BLOCK ALM

Block alarm

Note:
Additionally, the process alarms can be cleared in this parameter group.

ALERT_KEY

S

Index: 4
Access: r; w
Input:
Default:

The identification number of the plant unit. This information may be used in the
fieldbus host system for sorting alarms and events.

1...255
0
Note: The value 0 (default) is not a tolerated value and is therefore rejected with an
error message when writing to the device.

BLOCK_ALARM

D

Index: 36
Access: r; w

Shows the current block status with information about existing configuration,
hardware or system errors.
Note: Additionally, the active block alarm can be manually acknowledged in this
parameter group.

BLOCK_ERR

D

Index: 6
Access: r
Display:

Shows the active block error.

SIMULATE ACTIVE

Simulation possible, Simulation Enable set.

OUT OF SERVICE

The block model is O/S .

LOST STATIC DATA

Data loss in EEPROM

DEVICE NEEDS MAINTENANCE SOON

(Zero error, control loop disturbed or total valve travel.
exceeded). This alert triggers a block alarm (BLOCK_ALM) of
the ResourceBlock.

40

EB 8383-1 EN

Parameter description

«
...
38
39
40
41
42
...
»

Содержание foundation 3787

































































































Отзывы:

Нет отзывов