Samson Expedition XP800 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 20

Samson Expedition XP800 Скачать руководство пользователя страница 14

14

Quick Start

1. Be sure that the XP800’s POWER switch is set to the OFF position.

2. If the speakers are not connected, connect the speaker wires as described in the

previous section.

3. Turn each of the channel LEVEL and MASTER volume controls fully counterclock-

wise, to the “0” position.

4. Next, connect one side of the included power cable to the XP800 mixer’s power

inlet and the other to a grounded AC power outlet.

5. Connect your microphones using standard XLR cables, instruments using ¼” phone

cables, and MP3 player using

¹

/

8

” cable, into the appropriate jacks on the mixer.

SIGNAL

SIGNAL

SIGNAL

SIGNAL

SIGNAL

SIGNAL

SIGNAL

Electric Acoustic

Guitar

Keyboard

XP800 Speaker Cabinets

Active

Subwoofer

Dynamic Microphone

6. Switch on all equipment connected to the XP800, then switch the XP800’s POWER

switch to the ON position.

7. Turn the MASTER level control about 3/4 of the way up.

8. Start talking or playing into channel 1 while slowly adjusting the LEVEL control

until you have reached the desired level. Do the same for each channel you are
using.

«
...
12
13
14
15
16
...
»

Содержание Expedition XP800





















Отзывы:

Нет отзывов