Samson AirLine MICRO, Руководство пользователя

Страница: 8 / 20

AirLine Micro Earset Owners Manual 6
If you feel that the level of the microphone needs further adjustment, press and hold the AH2 Multi-Function Switch while
the unit is powered on until the Status Indicator turns off, and release the switch . Then press and hold the Multi-Function
Switch again for 5 seconds . The AH2 Status Indicator will first flash GREEN then flash YELLOW to show that you are in the
Volume Adjustment mode . Press and release the Multi-Function Switch once, and the microphone volume will increase one
level . To continue to adjust the microphone volume, press and release the Multi-Function Switch until the maximum level
is reached . There are 5 levels . With each increasing level, the Status Indicator will flash faster . After level 5 is reached, the
transmitter will cycle back down through the levels each time the Multi-Function Switch is pressed . As the levels decrease,
the Status Indicator flashes slower . When the desired level is reached, release the Multi-Function Switch . The AH2 will return
to normal operation after 10 seconds, and the Status Indicator will be steady GREEN .
12 . Do a walk-around through the intended area of coverage while observing the AR2’s Status Indicator; it should stay steadily
GREEN, indicating sufficient RF reception in all areas of coverage . If the AR2’s Status Indicator lights YELLOW, it designates
RF dropout or muted receiver . Reposition the device (or its antennas) as necessary . If extended range coverage is required,
another AR2 true diversity receiver (set to the same channel as the transmitter) should be used .
13 . If you have followed all the steps above and are experiencing difficulties, please call Samson Technical Support
(1-800-372-6766) between 9 AM and 5 PM EST . If you purchased your system outside of the U .S ., please contact your local
distributor .
Quick Start