HP-52RBJ User Manual Creation Date: February 10, 2015
Revision No: V.4.0 Revision Date:
June 8
, 2020
1/5
MODEL NUMBER: HP-52RBJ
AM/FM RADIO HEADPHONE WITH BLUETOOTH & AUX-IN JACK
USER MANUAL
Locations of Controls
Battery Installation
Either 3 x AAA sized battery or Tailor Made Lithium Battery can be used.
Lithium Battery:
-
Ensure that the On/O
ff
Knob is switched o
ff
.
-
Open the Battery Cover. Insert the tailor-made Lithium Battery into the Chamber and plug the battery cord into the
Power Connector in the correct direction as shown in the figure to ensure that the power supply is connected. Close
the Battery Cover.
-
Please order the Tailor Lithium Battery with extra cost also available upon requested.
Other types of Lithium
Batteries are not recommended.
AAA Sized Batteries
-
Turn off the headset. Open the battery door, insert 3 pieces AAA sized batteries. Close the battery door.
Time Setting
-
Turn off the headset by turning the volume knob in anti clockwise direction. Press
button or
to select 12 or
24-hours mode.
-
Turn off the headset by turning the volume knob in anti clockwise direction. Press MODE button. When time is
flashing, press
or
to adjust the hour, then press MODE to confirm. Then adjust minutes, apply same
procedure as above, then press MODE button to confirm the setting.
Radio Mode
-
Turn on the headset by tuning the Power ON/OFF Knob (which combines with Volume Control) in clockwise
direction.
-
Tap quickly the button to toggle between FM/AM/BT Setting. Set to AM or FM to listen to radio.
-
Manual search: Press
or
(scan) buttons step by step until it reaches your desired station.
-
Auto Scan: Press
or
(scan) buttons for 2 seconds, then release the button when seeking starts. Auto scan will
stop on clear radio stations.
-
Preset Station: 10 preset stations in AM band and FM band. Total is 20 preset stations. Hold MODE button, then
release the button when M and the preset station number are flashing. Press
or
to save the station to your
desired position. Press MODE button to confirm your setting.
-
Listen to the preset status by pressing the MODE button once to select preset stations M[1] to M[10].
BT Mode
-
Turn on the Bluetooth function on your mobile phone or any other external Bluetooth devices.
-
Tap the button to toggle between FM/AM/BT Setting. Select (
) to activate the Bluetooth function.
-
In your Bluetooth device, seek 233210 and pair. After paired, - on - is shown on the LCD.
-
To disable Bluetooth function, press and hold the button for 2 seconds. OFF is shown on the display.
