Samson 6134, Монтаж и эксплуатация

Страница: 5 / 58

EB 6134 EN 1-1
Safety instructions and measures
1 Safety instructions and measures
Intended use
The Type 6134 p/i Converter converts a pneumatic signal into a standardized electric signal.
It is especially used as an intermediate element between pneumatic and electric control and
measuring equipment.
The pneumatic input signal from 0.2 to 1 bar is converted into an electric DC signal from 4
to 20 mA.
The device is designed to operate under exactly defined conditions (e.g. input signal, pres
-
sure). Therefore, operators must ensure that the device is only used in operating conditions
that meet the specifications used for sizing the device at the ordering stage. In case operators
intend to use the device in other applications or conditions than specified, contact SAMSON.
SAMSON does not assume any liability for damage resulting from the failure to use the de-
vice for its intended purpose or for damage caused by external forces or any other external
factors.
Î
Refer to the technical data and nameplate for limits and fields of application as well as
possible uses.
Reasonably foreseeable misuse
The device is not suitable for the following applications:
− Use outside the limits defined by the technical data
Furthermore, the following activities do not comply with the intended use:
− Use of non-original spare parts
− Performing service and repair work not described
Qualifications of operating personnel
The device must be mounted, started up, serviced and repaired by fully trained and qualified
personnel only; the accepted industry codes and practices must be observed. According to
these mounting and operating instructions, trained personnel refers to individuals who are
able to judge the work they are assigned to and recognize possible hazards due to their spe-
cialized training, their knowledge and experience as well as their knowledge of the applica-
ble standards.
Explosion-protected versions of this device must be operated only by personnel who has un-
dergone special training or instructions or who is authorized to work on explosion-protected
devices in hazardous areas.