Samson 6132, Монтаж и эксплуатация

Страница: 15 / 44

EB 6132 EN 4-1
Shipment and on-site transport
4 Shipment and on-site trans -
port
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
4.1 Accepting the delivered
goods
After receiving the shipment, proceed as fol-
lows:
1.
Check the scope of delivery. Check that
the specifications on the nameplate of the
device match the specifications in the de
-
livery note. See the 'Markings on the de-
vice' section for nameplate details.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent (re-
fer to delivery note).
4.2 Removing the packaging
from the device
Observe the following sequence:
Î
Do not remove the packaging until im-
mediately before installation.
Î
Dispose and recycle the packaging in ac-
cordance with the local regulations.
4.3 Transporting the device
Î
Pack the device properly to comply with
terms of transportation.
Transport instructions
− Protect the device against external influ -
ences (e.g. impact).
− Protect the device against moisture and
dirt.
− Observe transport temperature (see the
'Design and principle of operation' sec-
tion).
4.4 Storing the device
Risk of device damage due to improper
storage.
Î
Observe the storage instructions.
Î
Avoid long storage times.
Î
Contact SAMSON in case of different
storage conditions.
We recommend regularly checking the pre-
vailing storage conditions during long stor-
age periods.
NOTICE !
Note !