Samson 45-6, Монтаж и эксплуатация

Страница: 40 / 72

9-2 EB 3226 EN
Servicing
Risk of regulator damage due to incorrect
servicing or repair.
Service and repair work must be performed
by trained staff only.
Risk of regulator damage due to the use of
unsuitable tools.
Î
Only use tools approved by SAMSON
(see Annex).
Risk of regulator damage due to the use of
unsuitable lubricants.
Î
Only use lubricants approved by
SAMSON (see Annex).
Risk of regulator damage due to exces-
sively high or low tightening torques.
Observe the specified torques on tightening
regulator components. Excessively tightened
torques lead to parts wearing out quicker.
Parts that are too loose may cause leakage.
Î
Observe the specified tightening torques
(see 'Tightening torques' in Annex).
NOTICE !
NOTICE !
NOTICE !
NOTICE !
The regulator was checked by SAMSON
before it left the factory.
− Certain test results certified by SAMSON
lose their validity when the regulator is
opened. Such testing includes seat leakage
and leak tests.
− The product warranty becomes void if
service or repair work not described in
these instructions is performed without
prior agreement by SAMSON's After-sales
Service.
− Only use original spare parts by
SAMSON, which comply with the original
specifications.
SAMSON's After-sales Service can support
you in drawing up an inspection and test
plan for your plant.
Note
Tip