Samson 3724, Монтаж и эксплуатация

Страница: 32 / 40

32 EB 8395 EN
Malfunction
9 Malfunction
In case of a fault, the fault indication icon
is displayed.
If the fault indication icon appears after a
parameter code setting has been changed,
this indicates that this setting does not match
the values determined during initialization.
See Code
E1 (see code list in section 9.1).
Press buttons past Code P0 or P20. The re-
spective error code E0 to E15 together with
ERR appear on the display.
Refer to the code list for the cause of the er -
rors and the recommended action.
Example:
If, for instance, a travel has been entered in
Code P4 (nominal range) which is larger
than the maximum valve travel possible, the
initialization process would be interrupted
(
E2 error code) because the rated travel
would not have been reached ( E6 error
code). The valve moves to the fail-safe posi -
tion ( S indicated on the display).
mm
Display of the fault indica-
tion
The nominal range (Code P4) must be
changed and the positioner re-initialized to
remedy this problem.
Reset error codes
The E0 and E8 error codes can be reset as
follows:
Press or to select the error code.
Press to confirm the error code. ESC is
displayed. E8 blinks.
Press or until RST appears.
Press to reset the error.
The reset procedure can be canceled by
pressing when
ESC appears.