Samson 3724, Монтаж и эксплуатация

Страница: 31 / 40

EB 8395 EN 31
Servicing
8 Servicing
The positioner was checked by SAMSON
before it left the factory.
−
The product warranty becomes void if
service or repair work not described in
these instructions is performed without
prior agreement by SAMSON's After-sales
Service department.
−
Only use original spare parts by
SAMSON, which comply with the original
specifications.
The Type 3724 Positioner requires no main -
tenance.
Î
Observe the maintenance instructions of
any upstream supply air pressure reduc-
ing stations.
8.1 Preparation for return ship-
ment
Defective positioners can be returned to
SAMSON for repair.
Proceed as follows to return devices to
SAMSON:
1.
Put the control valve out of operation.
See associated valve documentation.
2. Fill in the Declaration on Contamination.
The declaration form can be download-
ed from our website at
u
SERVICE &
SUPPORT > After-sales Service.
3. Remove the positioner (see section 10).
4. Send the positioner to your nearest
SAMSON subsidiary. SAMSON
subsidiaries are listed on our website at
u
www.samson.de > Contact.
8.2 Firmware update
Contact your local SAMSON engineering
and sales office or subsidiary (www.samson.
de > About SAMSON > Sales offices) to re
-
quest a firmware update.
Required specifications
Please submit the following details on re -
questing a firmware update:
−
Type
− Serial number
−
Configuration ID
− Current firmware version
−
Required firmware version
Note