Samson 3375 Скачать руководство пользователя страница 62

Страница: 62 / 130

8-4

EB 8332-2 EN

Setup

8.2 Manual mode

The actuator stem can be moved mechanically or electrically.

8.2.1 Mechanical override

For mechanical manual override, use the handwheel (1, see Fig. 8-2) which can only be op

erated when the power supply is disconnected.

A mechanical override is not possible for actuators with fail-safe action. These actuators do
not have a handwheel.

Risk of injury while the fold-away handle is being folded or unfolded.

Take care when folding or folding the handle.

Turn the handwheel (1) clockwise to move the actuator in 'aL' direction and counterclockwise

to move it in the 'eL' direction (see Fig. 8-3).

Do not operate the manual override while the actuator is in operation or while the volt-
age supply is still connected.

Unfold and lock the fold-away handle (2) in place.

Note

WARNING

Содержание 3375



































































































































Результаты поиска

Содержание 3375

Отзывы:

Samson 3375, Монтаж и эксплуатация, Страница: 62 / 130

Результаты поиска

Содержание 3375

Отзывы: