Samson 3375, Монтаж и эксплуатация

Страница: 21 / 130

EB 8332-2 EN 3-7
Design and principle of operation
Table 3-2: Technical data · Digital positioner
Digital positioner
Input signal Current input 0/4 to 20 mA, adjustable · R
i
= 50 Ω
Voltage input 0/2 to 10 V, adjustable · R
i
= 20 kΩ
Pt 1000 input
1)
Measuring range: –50 to +150 °C, 300 µA
Binary input
2)
By jumpering the terminals, not galvanically isolated
Position feedback Current 0/4 to 20 mA, adjustable · Error message 24 mA
Resolution 1000 steps or 0.02 mA
Load Max. 200 Ω
Voltage 0/2 to 10 V, adjustable · Error message 12 V
Resolution 1000 steps or 0.01 V
Load Minimum 5 kΩ
Binary input Open-circuit voltage: 10 V; short-circuit current: 5 mA
By jumpering the terminals, not galvanically isolated
Binary output Floating, max. 230 V AC/1 A
Applications Positioner The travel follows the input signal
PID controller Fixed set point control
Two-step mode Two-step behavior, control over binary input
Three-step mode Three-step behavior, control over binary input
Temperature closed-
loop control upon in-
put signal failure
The integrated PID controller uses a fixed set point for
closed-loop control when the input signal is missing.
Display Icons for functions, codes and text field with backlight
Rotary pushbutton Operating control for on-site operation to select and con-
firm codes and values
Interface Standard RS-232 · For point-to-point connection to communication
participants or for memory pen · Permanently installed ·
Connection: RJ-12 connector socket
1)
For PID Controller (PID) and Temperature closed-loop control upon input signal failure (POSF) applications only
2) For two-step mode (2STP) and three-step mode (3STP) applications