Samson 3374, Инструкция по монтажу и эксплуатации

Страница: 37 / 68

EB 8331-3 EN 5-17
Installation
5.6 Electrical connection
Risk of fatal injury due to electric shock.
Î
Upon installation of the electric cables,
you are required to observe the regula
-
tions concerning low-voltage installations
according to DIN VDE 0100 as well as
the regulations of your local power sup-
plier.
Î
Use a suitable voltage supply which
guarantees that no dangerous voltages
reach the device in normal operation or
in the event of a fault in the system or
any other system parts.
Î
Only perform the electrical connection
after switching off the supply voltage.
Make sure the supply voltage cannot be
switched on again unintentionally.
Î
Connect the wiring as shown in
Fig. 5-19.
Î
Guide the cables to the spring-cage ter -
minals from the top.
After applying the supply voltage, the actua-
tor is ready for use.
A maximum of three cable glands can be
mounted to the housing for cable entry.
DANGER !
Note